Page 3
Exploded View/Parts List:
800-B10 (5301595)
Opposite side has typical hardware setup
Elbow Tee Cross
Clamp
Bag of 7: 5277730
DETAIL Hinge
(2xs)
#5277926 1/2” to 3/8” Conversion Kit
If your existing sprayer has a 1/2” I.D. hose supplying your original boom and you now have a boom with
3/8” I.D. hose, this conversion kit allows you to easily convert your supply line to fit onto the 3/8” I.D. hose
of your new boom.
Slip the hose mender’s 1/2” barb (larger side) into your existing 1/2” feeder hose and clamp in place with
(existing) original hose clamp. Slip the (included) 3/8” hose (5-1/2” long) onto the 3/8” barb of the hose
mender and clamp in place with one of the supplied hose clamps.
Now attach the open end of the hose onto the fitting on your boom which accepts the feeder line hose.
Make sure you place the hose clamp onto that hose prior to attaching it to your boom.
