background image

SMA America, LLC

1  Information on this Manual

Installation Manual

BTRPIN-IA-eng-IUS113911

9

1 Information on this Manual

Validity

This manual is valid for the SMA 

Bluetooth

 Repeater, firmware version V 0.18R, and higher.

This manual does not contain any information on connected devices. Detailed information on 

connected devices is provided in the device manuals.

Target Group

This manual is for the use of skilled workers. Only qualified personnel are allowed to perform the tasks 
set forth in this manual (see Section 2.2 "Target Group Qualification", page 10).

Additional Information

Additional information is available at www.SMA-America.com.

Typography

Nomenclature

In this manual, SMA America Production, LLC and SMA Solar Technology Canada Inc. are 

hereinafter referred to as SMA.
In this manual, SMA 

Bluetooth

®

 Wireless Technology is referred to as 

Bluetooth

.

In this manual, the SMA 

Bluetooth

®

 Repeater is referred to as SMA 

Bluetooth

 Repeater.

In this manual, PV plants and small wind turbine systems are referred to collectively as "plants".

Document Title

Document Type

SMA 

Bluetooth

®

 Wireless Technology

Technical Description

SMA 

Bluetooth

®

 Wireless Technology 

in Practice

Technical Information

Typography

Explanation

Example

"

light

"

Designates elements on a software 

user interface or display, or specifies 

device connections.

• The value can be read off in the 

"

Energy

" field.

bold

Designates elements that are to be 

selected or entered on a software 

user interface or display.

• Select 

Settings

.

• Enter 

10

 in the "

Minutes

" field.

>

Designates multiple elements that 

are to be selected on a software 

user interface or display.

• Select

 Settings > Date

.

[

Button/key

]

Designates buttons or keys that are 

to be selected or pressed.

• Select [

Next

].

Summary of Contents for BLUETOOTH REPEATER

































Reviews: