SMA Solar Technology AG
7 Electrical Connection
Operating Manual
MC_BOX_36-BE-en-20
23
7.3 Removing Protection against Contact
Figure 10: Positions of the attachment points of the contact hazard protection cover
Procedure:
1. Remove all pan head screws with washers from the contact hazard protection cover, and
remove the cover. Use a TX 30 screwdriver.
2. Set the contact hazard protection cover, pan head screws and washers aside for later use.
Position
Number
Description
A
1
Contact hazard protection cover of the Multicluster Box
B
6
Positions of the attachment points
Electrostatic discharge can cause irreparable damage to the Multicluster Box
Α Ground yourself before touching any component.
