SMA Solar Technology AG
4 Product Description
User Manual
REDUCERBOX-BA-en-16
17
4.2 Type Label
The type label provides unique identification of the Power Reducer Box. The type label is located on
the back of the Power Reducer Box.
Figure 4: Information on the type label
You will require the information on the type label to use the device safely and for customer support
from the SMA Service Line. The type label must be permanently attached to the Power Reducer Box.
Symbols on the Type Label
Item
Explanation
A
Device type
B
Serial number
C
Device-specific characteristics
Symbol
Description
Explanation
Indoor
The product is only suitable for indoor
installation.
C-Tick
The product complies with the requirements
of the applicable Australian EMC standards.
CE marking
The product complies with the requirements
of the applicable EC directives.
WEEE designation
Only dispose of the product in accordance
with the locally applicable disposal
regulations for electronic waste and not with
household waste.
