Procedure:
1. Activate the user interface (see Section 5.1, page 19).
2. Log in as
Installer
.
3. Select the menu
User Settings
(see Section 5.3 "Start Page Design of the User Interface",
page 24) on the start page of the user interface.
4. In the subsequent context menu, select [
Start the installation assistant
].
☑ The Installation Assistant will open.
A
C
B
Figure 3: Layout of the installation assistant
Position
Designation
Description
A
Configuration steps
Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
B
User information
Information about the current configuration step and the
setting options of the configuration step.
C
Configuration field
You can make settings in this field.
5.5
Changing the Password
The password for the inverter can be changed for both user groups. Furthermore, the user group
Installer
can change the password for the user group
User
as well as its own password.
5 Using the Inverter User Interface
SMA Solar Technology America LLC
User Manual
27
SB5.0-6.0-1SP-US-40-BA-en-10