7 Commissioning
SMA Solar Technology AG
Operating manual
71
SI44M-80H-13-BE-en-15
The country data set must be set correctly.
If you select a country data set which is not valid for your country and purpose, it can cause a disturbance in the
PV system and lead to problems with the grid operator. When selecting the country data set, you must always
observe the locally applicable standards and directives as well as the properties of the PV system (e.g. PV system
size, grid-connection point).
• If you are not sure which standards and directives are valid for your country or purpose, contact the grid
operator.
Country data sets not included in firmware for all EU countries
The firmware of the inverter does not include country data sets for all EU countries. A generally valid country data
set in accordance with EN 50549 is included instead. It can be used in EU countries for which no country data
set is available. For individual EU countries, however, it may be temporarily necessary to make adjustments to the
locally valid grid connection regulations via parameter settings. This is done on the basis of the country data set
previously valid for the country in the firmware version ≤ 2.99.99.R.
• It is decided how to proceed according to the locally valid regulations and the SMA manufacturer's
declaration valid for the country of use. Set the generally valid country dataset according to EN 50549 with
the firmware version ≥ 3.00.00.R or select the previously valid country dataset with the firmware version ≤
2.99.99.R. Make the parameter settings according to the manufacturer's declaration.
Procedure:
• In the parameter group
Grid monitoring > Grid monitoring
select the parameter
Set country standard
and
set the required country data set.
7.5
Changing Thresholds for Systems for Increased Self-Consumption
Relevant for systems connected to the utility grid
Country data sets not included in firmware for all EU countries
The firmware of the inverter does not include country data sets for all EU countries. A generally valid country data
set in accordance with EN 50549 is included instead. It can be used in EU countries for which no country data
set is available. For individual EU countries, however, it may be temporarily necessary to make adjustments to the
locally valid grid connection regulations via parameter settings. This is done on the basis of the country data set
previously valid for the country in the firmware version ≤ 2.99.99.R.
• It is decided how to proceed according to the locally valid regulations and the SMA manufacturer's
declaration valid for the country of use. Set the generally valid country dataset according to EN 50549 with
the firmware version ≥ 3.00.00.R or select the previously valid country dataset with the firmware version ≤
2.99.99.R. Make the parameter settings according to the manufacturer's declaration.
Procedure:
• If the Sunny Island may be operated on the utility grid and a change is necessary, change the configuration of the
Sunny Island in accordance with the system description of the selected Sunny Island system (see www.SMA-
Solar.com).
7.6
Battery Management
7.6.1
Safety When Setting the Battery Management Parameters
This section contains safety information that must be observed at all times when working on or with batteries.
To prevent personal injury or property damage and to ensure long-term operation of batteries and battery inverter,
read this section carefully and observe all safety information at all times
This section contains safety information that must be observed at all times when working on or with batteries.
