7 Commissioning
SMA Solar Technology AG
Operating manual
SI44M-80H-13-BE-en-15
70
Once you have logged into the user interface as
Installer
, the installation assistant opens.
Layout of the installation assistant
A
C
B
Figure 16: Layout of the installation assistant (example)
Position
Designation
Description
A
Configuration steps
Overview of the installation assistant steps. The number of steps de-
pends on the type of device and the additionally installed modules.
The current step is highlighted in blue.
B
User information
Information about the current configuration step and the setting op-
tions of the configuration step.
C
Configuration field
You can make settings in this field.
Procedure:
1. Select the configuration option
Configuration with Installation Assistant
.
☑ The installation assistant will open.
2. Follow the installation assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [
Save and next
].
☑ In the last step, all made settings are listed in a summary.
4. To save the settings to a file, select [
Export a summary
] and save the file on your computer, tablet PC or
smartphone.
5. To correct settings you made, select [
Back
], navigate to the desired step, correct settings and select [
Save and
continue
].
6. Once all settings are correct, select [
Next
] in the summary.
☑ The start page of the user interface opens.
7.4
Configuring the Country Data Set
During configuration of a storage or battery-backup system the inverter is configured to a country data set valid for
VDE-AR-N 4105:2018-11. You must adjust the country data set for the installation site.
