4 Starting and Stopping the System
SMA Solar Technology AG
20
SI30M-44M-60H-80H-BE-en-32
Operating Manual
Procedure:
• Press and hold the "Off" button on the Sunny Island until an
acoustic signal sounds.
☑ The inverter LED is off on all Sunny Island inverters.
4.6 Setting Time-Controlled Inverter Operation in Off-Grid Systems
Procedure:
1. Log in to the communication product as
User
(see User Manual of the Communication Product) or switch to user
mode on the Sunny Remote Control (see Section 5.3, page 26).
2. To set the time-controlled inverter operation on the Sunny Remote Control, select
the
Inverter
display page on the Sunny Remote Control and press the button.
☑ The Sunny Remote Control switches to the
Inverter
setting page.
3. Set the time-controlled inverter operation:
• Select the
Start date for time-controlled inverter operation
/
Str.Date
parameter and set it to the desired
start date.
• Select the
Start date for time-controlled inverter operation
/
Str.Date
parameter and set it to the desired
start time.
• Select the
Start date for time-controlled inverter operation
/
Str.Date
parameter and set it to the desired
running time.
• Select the
Repetition cycle for time-controlled inverter operation
/
Repetition
parameter and set it to the
desired repetition cycle.
4. To activate time-controlled inverter operation, select the
Time controlled inverter operation
/
Timed Start
parameter and set it to Enable.
☑ Time-controlled inverter operation is activated. If the Sunny Island has started automatically under time-control and
you stop the Sunny Island, time-controlled inverter operation is deactivated automatically.
Example: Parameter settings for time-controlled inverter operation
You want to operate the Sunny Island in inverter operation every Sunday from 10:00 a.m. to 6:00 p.m., starting on
Sunday, January 8, 2012. To do this, set the Sunny Island as follows:
• Str.Date: 08.01.2012
• Start Time: 10:00:00
• Run Time: 08:00:00
• Repetition: Weekly
