SMA Solar Technology AG
6 User Interface
Installation Manual
STPS60-IA-xx-13
33
6.3 Display
The display gives the user access to information about the
inverter.
Figure 28: Display buttons and functionality
Display buttons and functionality
The screen design is divided into different sections:
1. Main screen. Current and daily yield.
This section contains:
– Actual output power (kW)
– Daily energy (kWh)
– Total energy (kWh)
– Current date.
– Current time
– Operating mode (#)
2. Inverter information. This section contains:
– Inverter device type
– Inverter name
– Inverter serial number
– IP Address
– Serial number of the SMA Inverter Manager
– Software version of the inverter
3. Actual values This section contains:
– DC voltage and current
– Phase-to-phase voltages
– Phase currents
– Grid frequency
INFORMATION
It may take some time until the display responds after
switching on.
Button
Function
F1
Adjust the contrast level of
display. Use arrow up/down
button while pressing the F1
button.
F2, F3 and F4
No function
Home
Return to main screen
Ok
No function
Up arrow
A step up
Down arrow
A step down
Arrow right
Toggles screen right
Arrow left
Toggles screen left
Back
Return to main screen
On – green LED
-
Alarm – red LED
-
