Mounting
SMA America, LLC
26
SB8-10TL-IUS103811
Installation Guide
5.5 Mounting the Sunny Boy onto the wall mounting bracket
1. Remove the handle covers on the right and left side of the Sunny Boy.
2. Transport the Sunny Boy between two persons, using the side handles above and below.
or
Put a steel bar with a maximum diameter of 1
1
⁄
8
in (30 mm) through the enclosure opening
above and transport it between two people.
CAUTION
Falling of the Sunny Boy may cause injuries. Crushing of body parts will resullt.
• Take the weight of the Sunny Boy into account when mounting.
3. Hook the Sunny Boy using the enclosure opening in
the back plate into the wall bracket.
4. Inspect the Sunny Boy from both sides to ensure that
it sits centered on the wall bracket.
5. Screw the Sunny Boy onto the wall mounting bracket
on both sides using the screws provided.
6. Tighten the screws clockwise with a torque of
44 in‑lbs. (5 Nm).
7. Check that the unit is securely in place.
8. Put the handle covers over the handles.
The air grills are marked "rechts/right" and
"links/left" on the interior for proper assignment.
The air grills prevent dirt and insects from entering
the device and if necessary, can be reordered from
SMA America 13 ”Accessories” (page 70).
☑ The Sunny Boy is mounted.
