9 Operation
SMA Solar Technology AG
Operating manual
SB55-LV-JP-41-BE-en-13
47
Log in as Installer or User for the First Time
Password assignment for user and installer
The passwords for the user groups
Installer
and
User
must be assigned when accessing the
user interface for the first time. If the inverter was registered in a communication device (e.g.,
SMA Data Manager) and the system password was assigned, the system password is also the
installer password. In this case, only the user password must be assigned.
• If you as a specialist assign the user password, only pass the password on to persons to
access the inverter data via the user interface.
• If you as a user assign the installer password, only pass the password on to persons to
receive access to the system.
Installer password for inverters registered in a communication device or in
Sunny Portal
To be able to register the inverter in a communication device (e.g., SMA Data Manager) or in
a Sunny Portal system, the password for the user group
Installer
must match the system
password. If you assign a password for the user group
Installer
via the user interface of the
inverter, the same password must also be used as the system password.
• Assign a uniform installer password to all SMA devices in the system.
Procedure:
1. In the drop-down list
Language
, select the desired language.
2. In the
Password
field, enter a password for the
User
user group.
3. In the
Repeat password
field, enter the password again.
4. Click on
Save
.
5. In the
New password
field, enter a password for the
Installer
user group. Assign a uniform
password to all SMA devices to be registered in a system. The installer password is also the
system password.
6. In the
Repeat password
field, enter the password again.
7. Click on
Save and log in
.
☑ The
Configuring the Inverter
page opens.
Log in as the User or Installer
1. In the drop-down list
Language
, select the desired language.
2. In the
User group
drop-down list, select the entry
Installer
or
User
.
3. Enter the password in the field
Password
.
4. Select
Login
.
☑ The start page of the user interface opens.
Log Out as the User or Installer
1. On the right-hand side of the menu bar, select the menu
User Settings
.
2. In the subsequent context menu, select [
Logout
].
☑ The login page of the user interface opens. The logout was successful.
