9 Operation
SMA Solar Technology AG
Operating manual
SB55-LV-JP-41-BE-en-13
50
Position
Designation
Description
D
Status bar
Displays the following information:
• Inverter serial number
• Inverter firmware version
• IP address of the inverter within the local network
and/or IP address of the inverter during WLAN
connection
• With WLAN connection: Signal strength of WLAN
connection
• User group logged in
• Date and device time of the inverter
E
Current power and cur-
rent consumption
Temporal progression of the PV power and the power
consumption of the household over the selected time pe-
riod. Please note, the power consumption will only be dis-
played if an energy meter is installed in the PV system.
F
Status display
The various areas display information on the current status
of the PV system.
•
Device status
Displays whether the inverter is currently in a fault-
free operating state or whether there is an Error or
Warning present.
•
Current power
Displays the power currently being generated by the
inverter.
•
Yield
Displays the energy yield of the inverter.
•
Grid supply
Displays the energy supply from the utility grid.
•
Power at the grid-connection point
Indicates which power is currently fed in or obtained
at the grid-connection point.
9.4
Activating the Smart Inverter Screen
With the Smart Inverter Screen, the most important inverter data is displayed directly on the user
interface login page. To activate the Smart Inverter Screen, proceed as listed in the following.
Procedure:
1. Activate the user interface (see Section 9.1, page 43).
2. Log in as
Installer
or
User
.
