5 Product Overview
SMA Solar Technology AG
Operating manual
SB55-LV-JP-41-BE-en-13
17
5.3
Interfaces and Functions
User interface for configuration and monitoring
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product.
The product user interface can be called up via the web browser if there is an existing connection
to an end device (e.g. computer, tablet PC or smartphone).
Smart Inverter Screen
The Smart Inverter Screen enables you to view the status display and to display the current power
and consumption on the user interface login page. This gives you an overview of the most important
inverter data without having to log into the user interface.
The Smart Inverter Screen is deactivated by default. The Smart Inverter Screen can be activated via
the user interface once the inverter has been commissioned.
SMA Speedwire
The product is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. SMA Speedwire is designed for a data transfer
rate of 100 Mbps and enables optimum communication between Speedwire devices within
systems.
The products supports the encrypted system communication with SMA Speedwire Encrypted
Communication. In order to be able to use the Speedwire encryption in the system, all Speedwire
devices, except for the SMA Energy Meter, must support the function SMA Speedwire Encrypted
Communication.
SMA Webconnect
The product is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the product and Internet portals Sunny Portal and
Sunny Places without any additional communication device and for a maximum of 13 products per
visualized system. In PV systems with more than 13 products, there is the option of establishing data
transmission between the products and Sunny Portal via the data logger (e.g.,
SMA Data Manager) or distributing the inverters over several systems. If there is an existing WLAN
or Ethernet connection, you can directly access your visualized system via the web browser on your
end device.
WLAN connection to SMA 360° app
The product has a QR code. By scanning the QR Code attached to the product via the SMA 360°
app, access to the product is established via WLAN and the connection to the user interface is
made automatically.
