SMA Solar Technology AG
3 Product Description
User Manual
SCCP-JP-BA-A4-en-12
15
3.2.2 Type Label
The type label clearly identifies the product. Two type labels are present on the Sunny Central. The type labels are
positioned on the left-hand side of the air duct inside the inverter cabinet and in the interface cabinet on the left-hand side
of the enclosure.
You will require the information on the type label to use the product safely and when seeking customer support from the
SMA Service Line. The type labels must be permanently attached to the product.
Symbols on the Product and on the Type Label
All symbols on the Sunny Central and the type label are explained below.
Position
Description
A
Inverter cabinet
B
Interface cabinet
C
Touch display
D
Service interface
E
Key switch
Reading off the serial number
You can read off the serial number without opening the Sunny Central. The serial number is located on the top left
corner of the Sunny Central roof. You can also read off the serial number from the touch display.
Reading off the firmware version
You can read off the version number of the Sunny Central and touch display firmware via the user interface. You can
also read off the version number of the touch display firmware on the touch display.
Symbol
Designation
Explanation
CE marking
The product complies with the requirements of the applicable
EU directives.
Protection class I
All electrical equipment is connected to the protective
conductor system of the product.
Degree of protection IP54
The product is protected against interior dust deposits and
splashing water from all angles.
Beware of a danger zone
This warning symbol highlights a danger zone. Be particularly
vigilant and cautious when working on the product.
Beware of dangerous voltage
The product operates at high voltages. All work on the
product must be carried out by qualified persons only.
Beware of hot surface
The product can get hot during operation. Avoid contact
during operation. Allow the product to cool down sufficiently
before carrying out any work. Wear personal protective
equipment such as safety gloves.
Use hearing protection.
The product generates loud noises. When working on the
product, wear hearing protection.
