manualshive.com logo in svg

SMA Sunny Central 500CP-JP, User Manual

The SMA Sunny Central 500CP-JP is a top-of-the-line solar inverter designed for large-scale commercial and industrial applications. Ensure optimal performance by referring to the User Manual, which can be downloaded for free from 88.208.23.73:8080. Learn how to maximize efficiency and productivity with this reliable and innovative product.

Share
Download
background image

SMA Solar Technology AG

Table of Contents

User Manual

SCCP-JP-BA-A4-en-12

3

Table of Contents

1  Information on this Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2  Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.1  Intended Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
2.2  Safety Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3  Skills of Qualified Persons  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4  Personal Protective Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3  Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.1  PV System Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2  Sunny Central . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.2.1  Design of the Sunny Central  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
3.2.2  Type Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3.2.3  Operating Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.2.4  Touch Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3.2.5  Key Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

3.3  Sunny Central Communication Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.4  Sunny Central String-Monitor Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.5  Remote Shutdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.6  External Fast Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.7  Ground-Fault Monitoring and Insulation Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.7.1  Mode of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3.7.2  Ground-Fault Monitoring in Grounded PV Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

3.7.2.1  Ground Fault Detection and Interruption (GFDI)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
3.7.2.2  Remote GFDI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
3.7.2.3  Soft Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

3.7.3  Insulation Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3.7.3.1  Insulation Monitoring Device  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3.7.4  Combined Insulation and Ground-Fault Monitoring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.7.4.1  GFDI and Insulation Monitoring Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
3.7.4.2  Remote GFDI and Insulation Monitoring Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
3.7.4.3  Remote Soft Grounding and Insulation Monitoring Device  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

3.8  Grid Management Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.8.1  Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
3.8.2  Active Power Limitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
3.8.3  Reactive Power Setpoint  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
3.8.4  Behavior in the Absence of Active and Reactive Power Setpoints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
3.8.5  Full and Limited Dynamic Grid Support (FRT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
3.8.6  Decoupling Protection Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
3.8.7  Grid Management Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
3.8.8  Q at Night . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

3.9  Islanding Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.9.1  Active Islanding Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
3.9.2  Passive Islanding Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

3.10  Schematic Diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Summary of Contents for Sunny Central 500CP-JP













































































































Reviews:

No comments

Related manuals for Sunny Central 500CP-JP

Paradox UC300 Reference And Installation Manual preview
UC300
Brand: Paradox Pages: 28
Cobra CPI 875 Operating Instructions Manual preview
CPI 875
Brand: Cobra Pages: 11
Yamaha UX16 Owner'S Manual preview
UX16
Brand: Yamaha Pages: 31
µ-Dimension 12/300 Owner'S Manual preview
12/300
Brand: µ-Dimension Pages: 6
Parker 890GTR Product Manual preview
890GTR
Brand: Parker Pages: 149
Black Box ACS411A-R2 User Manual preview
ACS411A-R2
Brand: Black Box Pages: 60
M-Audio MICRO DAC 24/192 User Manual preview
MICRO DAC 24/192
Brand: M-Audio Pages: 2
ICT SITE INVERTER 300 Instruction Manual preview
SITE INVERTER 300
Brand: ICT Pages: 8
Advantech B+B SmartWorx 485USB9F-2W Quick Start Manual preview
B+B SmartWorx 485USB9F-2W
Brand: Advantech Pages: 2
DeLOCK 86441 User Manual preview
86441
Brand: DeLOCK Pages: 2
AceWav ACW EM8 Quick Start preview
ACW EM8
Brand: AceWav Pages: 2
B&B Electronics Giga-MiniMC 856-10730-RX User Manual preview
Giga-MiniMC 856-10730-RX
Brand: B&B Electronics Pages: 15
ENC EDS300 Series Manual preview
EDS300 Series
Brand: ENC Pages: 57
Elation PRO HAZE DMX User Instructions preview
PRO HAZE DMX
Brand: Elation Pages: 8
Waeco SinePower MSI212 Installation And Operating Manual preview
SinePower MSI212
Brand: Waeco Pages: 220
Transition Networks SPOEB1011-105 User Manual preview
SPOEB1011-105
Brand: Transition Networks Pages: 16
RDZ FLOOR-S Installation & Technical Manual preview
FLOOR-S
Brand: RDZ Pages: 60
Climax CL-AB-RF-W Installation Manual preview
CL-AB-RF-W
Brand: Climax Pages: 2

Brands by name

Popular brands

Load more brands