manualshive.com logo in svg

SMA Sunny Central 500CP-JP, User Manual

The SMA Sunny Central 500CP-JP is a top-of-the-line solar inverter designed for large-scale commercial and industrial applications. Ensure optimal performance by referring to the User Manual, which can be downloaded for free from 88.208.23.73:8080. Learn how to maximize efficiency and productivity with this reliable and innovative product.

Share
Download
background image

SMA Solar Technology AG

Table of Contents

User Manual

SCCP-JP-BA-A4-en-12

5

8.1.3  Displaying the Status of Active Power Limitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
8.1.4  Displaying Error Messages and Warnings for Active Power Limitation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

8.2  Reactive Power Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

8.2.1  Mode of Reactive Power Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.1.1  Selecting the Mode with the Parameter Q

-

VArMod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

8.2.1.2  No Reactive Power Control: Off Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
8.2.1.3  Reactive Power Control with Setpoint Command via Modbus Protocol: VArCtlCom Mode  . . . . . . . . . . . . . . . .55
8.2.1.4  Reactive Power Control with Setpoint Command via Modbus Protocol: PFCtlCom Mode. . . . . . . . . . . . . . . . . .55
8.2.1.5  Reactive Power Control with Absolute Value: VArCnst Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
8.2.1.6  Reactive Power Control as a Percentage of the Nominal Power: VArCnstNom Mode . . . . . . . . . . . . . . . . . . . .55
8.2.1.7  Reactive Power Setpoint via Standard Signal: VArCnstNomAnIn Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
8.2.1.8  Reactive Power Setpoint via Displacement Power Factor cos φ: PFCnst Mode . . . . . . . . . . . . . . . . . . . . . . . . . .56
8.2.1.9  Displacement Power Factor cos φ via Standard Signal: PFCnstAnIn Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
8.2.1.10  Displacement Power Factor cos φ as a Function of Feed-In Power: PFCtlW Mode . . . . . . . . . . . . . . . . . . . . . . .57
8.2.1.11  Reactive Power as a Function of Line Voltage: VArCtlVol Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
8.2.1.12  Measures for Voltage Support through Parameterization of Reactive Power/Voltage Characteristic Curve: 

VArCtlVolHystDb Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

8.2.1.13  Measures for Voltage Support through Parameterization of Reactive Power/Voltage Characteristic Curve: 

VArCtlVolHystDbA Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

8.2.2  Displaying Error Messages and Warnings for the Reactive Power Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . .63

8.3  Q at Night  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

8.3.1  Selecting Parameter QoDQ-VarMod  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
8.3.2  No Q at Night: Off Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
8.3.3  Q at Night with Setpoint Command via Modbus Protocol: VArCtlCom Mode. . . . . . . . . . . . . . . . . . . . . . . . .65
8.3.4  Q at Night with Absolute Value: VArCnst Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
8.3.5  Q at Night as a Percentage of the Nominal Power: VArCnstNom Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
8.3.6  Q at Night via Standard Signal: VArCnstNomAnIn Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
8.3.7  Q at Night as a Function of Line Voltage: VArCtlVol Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
8.3.8  Measures for Voltage Support through Parameterization of Reactive Power/Voltage Characteristic Curve: 

VArCtlVolHystDb Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

8.3.9  Measures for Voltage Support through Parameterization of Reactive Power/Voltage Characteristic Curve: 

VArCtlVolHystDbA Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

9  Setting the Insulation Monitoring of the PV System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

9.1  Setting the PV System to Insulation Monitoring with GFDI and an Insulation Monitoring Device  . . . . . . . . 72

9.1.1  Safety during Insulation Monitoring of the PV System with GFDI and an Insulation Monitoring Device . . . . . .72
9.1.2  Switching to Insulated Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
9.1.3  Switching to Grounded Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

9.2  Setting the PV System to Insulation Monitoring with Remote GFDI and an Insulation Monitoring Device . . 73

9.2.1  Information on Insulation Monitoring of the PV System with Remote GFDI and an Insulation  

Monitoring Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

9.2.2  Switching to Insulated Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
9.2.3  Switching to Grounded Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

9.3  Setting the PV System to Insulation Monitoring with Remote Soft Grounding and an Insulation  

Monitoring Device  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

9.3.1  Information on Insulating PV Modules with Remote Soft Grounding and an Insulation Monitoring Device . . .74
9.3.2  Switching to Insulated Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
9.3.3  Switching to Grounded Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Summary of Contents for Sunny Central 500CP-JP













































































































Reviews:

No comments

Related manuals for Sunny Central 500CP-JP

Srne HF4825U80-145 User Manual preview
HF4825U80-145
Brand: Srne Pages: 38
B&B Electronics McLIM TP-TX/FX User Manual preview
McLIM TP-TX/FX
Brand: B&B Electronics Pages: 13
LevelOne Infinity IEC-2001 Quick Installation Manual preview
Infinity IEC-2001
Brand: LevelOne Pages: 2
Magnimage LED-500CD User Manual preview
LED-500CD
Brand: Magnimage Pages: 40
AJA OG-Hi5-4K-Plus Installation And Operation Manual preview
OG-Hi5-4K-Plus
Brand: AJA Pages: 43
Waeco SinePower MSI924 Installation And Operating Manual preview
SinePower MSI924
Brand: Waeco Pages: 436
Samlexpower SA-1000K Series User Manual preview
SA-1000K Series
Brand: Samlexpower Pages: 23
V-TAC VT-6605103 Instruction Manual preview
VT-6605103
Brand: V-TAC Pages: 21
l-com LCTP-10BT-10B2 Installation Manual preview
LCTP-10BT-10B2
Brand: l-com Pages: 11
AGM AGP 2300 S Original Instruction Manual preview
AGP 2300 S
Brand: AGM Pages: 71
Eleris EM303B User Manual preview
EM303B
Brand: Eleris Pages: 184
Pulse-Eight P8-HDBT-L-SP4 Quick Setup Manual preview
P8-HDBT-L-SP4
Brand: Pulse-Eight Pages: 2
Sunforce 44455 Manual preview
44455
Brand: Sunforce Pages: 1
ADF Web HD67B12-B2 User Manual preview
HD67B12-B2
Brand: ADF Web Pages: 32
Parallax Power Supply 7100 Series Power Center Owner'S Operation Manual preview
7100 Series Power Center
Brand: Parallax Power Supply Pages: 2
Kramer FC-400 User Manual preview
FC-400
Brand: Kramer Pages: 15
Bose SoundDock Series II Owner'S Manual preview
SoundDock Series II
Brand: Bose Pages: 16
Ryobi AUN9230TT Operator'S Manual preview
AUN9230TT
Brand: Ryobi Pages: 14

Brands by name

Popular brands

Load more brands