SMA Solar Technology AG
11 Instantaneous Values
User Manual
SCCP-JP-BA-A4-en-12
87
11.1.4 Internal Device Values
11.1.5 Internal Meters
11.1.6 Service-Relevant Display Values
Display values that are only relevant to SMA Solar Technology are listed below.
Name
Description
Cntry
Country setting or configured standard
DInExlStrStp
Status of remote shutdown unit
DInGfdi
Status of GFDI
DInKeySwStrStp
Status of key switch
DOutMntSvc
Status of signal light
Dt
Date
Firmware
Firmware version of operation control unit
Firmware 2
Firmware version of digital signal processor
Tm
Time
Type
Device type
Name
Description
CntFanCab1*
Operating hours of interior fan 1, in h
CntFanCab2*
Operating hours of interior fan 2, in h
CntFanHs*
* These instantaneous values are only visible after entering the installer password.
Operating hours of heat sink fan, in h
CntFanTrf1
Operating hours of transformer fan 1, in h
CntFanTrf2
Operating hours of transformer fan 2, in h
CntGfdiSw
Number of GFDI trippings
CntHrCab1*
Operating hours of heating element 1, in h
CntHtCab2*
Operating hours of heating element 2, in h
E-Today
Energy fed into the grid during the current day, in kWh
E-total
Total energy fed into the grid, in kWh
h-HighV
Operating hours at high DC voltage
h-On
Operating hours (feed-in time and waiting time) of the inverter, in h
h-Total
Feed-in hours (feed-in time without waiting time) of the inverter, in h
Name
Name
BfrSolIrr
Firmware-3
CardStt
Firmware-4
ExtSollrr
Firmware-5
Fb_SVMMode
Firmware-6
