Safety Instructions
SMA
Technologie AG
Page 6
SC-100-13:SE2407
Installation manual
3.3 About this Manual
This manual was written with the greatest possible care. However, discrepancies cannot
be excluded. SMA Technologie AG accepts no responsibility or liability for injury to
persons, or material damage caused by mistakes in this manual.
3.4 Checking and Storage
Upon receipt of the equipment, check the packaging and the device for any possible
damage and compare the contents of the delivery with the delivery documentation. In
the case of damage to the device and/or unclear delivery contents, please contact
SMA Technologie AG immediately (contact address is in the appendix).
3.5 Transport
Only the transport methods described in the installation guide are permissible. Please
note the heavy weight of the equipment and the non-central center of gravity. The center
of gravity is marked on the packaging.
The equipment may only be stored when closed, thus ensuring its interior is
protected from dust and moisture.
During longer storage periods, the equipment must be kept in a dry place to
prevent moisture from entering the inverter.
Danger of tipping during transport.
Follow the "Sunny Central Transport Instructions" in
Appendix A
and pay
attention to the center of gravity markings on the packaging.
