Operating the Sunny Island
SMA
Solar Technology AG
100
SI2012_2224-TEN082311
Technical Description
Skip back to the previous menu level:
•
Turn the pushbutton completely to the left
or right until "back" is shown on the
display.
•
Press the pushbutton
10.2.6 Selecting Warnings and Faults
The warnings and faults list can be found in the main menu under 400# Failure/Event. Then go to
the submenu 1.
•
List of the current warnings and faults - 410# Fail Current.
•
List of all warnings and faults (history) - 420# Fail History
Example:
Warnings and faults are shown on the display as
follows:
•
To the left are the menu number and name.
To the right is the total number of instances
for this particular warning or fault, to date.
•
Date and time of the warning/fault.
•
Warning or Fault and number (see chapter
18.7 "Warnings and Failure messages"
(Page 188)). The "enter" arrow shows that
the fault must be cleared and confirmed
thereafter. Only thereafter can the Sunny
Island be restarted.
•
Description of the warning/fault.
Pending:
The warning/fault is pending.
The fault has not yet been cleared.
Arrive:
Time at which the warning/fault
appeared.
Clear:
The warning/fault has been
cleared.
430# Event
[
<
-- back]
410# Pending 002
2007-04-17 11:55:01
W212 Warning
BatTempHigh
