SMA
Solar Technology AG
Sunny Island Electrical Connection
Technical Description
SI2012_2224-TEN082311
67
Proceed as follows when connecting the digital input:
1.
Pierce the rubber plugs with a pointed tool.
2.
Fit the cables with wire sleeves.
3.
Introduce both cables from the outside
through the opening.
4.
Plug one wire into each of the "DigIn"
contacts of the 4-pole terminal included.
5.
Tighten the screws of the contact.
6.
Insert the plug into the "DigIn BatVtgOut"
socket on the board.
Further Information
For further information on connecting and operating the GenMan see the respective
product documentation.
