Position
Symbol
Designation
Status
Explanation
G
Standby
−
Position of the buttons for switching on and off
H
AC operation
−
Position of the button for starting and stopping
operation
* Flashing at intervals of 0.5 s to 1 s
** Flashing at intervals of 1.5 s to 2 s
3.3
Type Label
The type label clearly identifies the product. The type label is located on the right-hand side of the enclosure. You will
find the following information on the type label:
• Address of SMA Solar Technology AG
• Device type (Model)
• Serial number (Serial No.)
• Device-specific characteristics
You will require the information on the type label to use the product safely and when seeking customer support from
Service (see Section 16 "Contact", page 161).
Symbols on the inverter, the ESS and the type label
Symbol
Explanation
Danger to life due to electric shock
The product operates at high voltages. All work on the product must be carried out by qualified
persons only.
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during operation. Prior to performing any
work on the product, allow the product to cool down sufficiently.
Observe the documentation
Observe all documentation supplied with the product.
Alternating current
Direct current
Transformer
The product has a transformer.
WEEE designation
Do not dispose of the product together with the household waste but in accordance with the dis-
posal regulations for electronic waste applicable at the installation site.
CE marking
The product complies with the requirements of the applicable EU directives.
Protection class I
All electrical equipment is connected to the grounding conductor system of the product.
3 Product Description
SMA Solar Technology AG
Operating Manual
17
SI30M-44M-60H-80H-BE-en-33
Summary of Contents for SUNNY ISLAND 3.0M
Page 163: ......
Page 164: ...www SMA Solar com...
