Procedure:
• Press and hold the start-stop button on the Sunny Island until
the inverter LED is glowing orange.
•
or
• Press and hold the button on the Sunny Remote Control until
the progress bar has run down.
☑ The inverter LED on each Sunny Island is glowing orange.
The Sunny Island inverters are in standby mode.
4.4
Switching Off the Sunny Island
Requirements:
☐ The system is stopped.
Procedure:
• Press and hold the "Off" button on the Sunny Island until an
acoustic signal sounds.
☑ The inverter LED is off on all Sunny Island inverters.
4.5
Tripping the Emergency Disconnection of the System
Effects of an emergency disconnection
Emergency disconnection triggers the uncontrolled shutdown of the system and unsaved data is lost.
• Only use the emergency disconnection to avoid danger or consequential damage.
• In the event of an emergency disconnection in a multicluster system, always check whether any fuse elements
in the Multicluster-Box, such as circuit breakers, have tripped. If any fuse elements have tripped, reactivate
these fuse elements.
Procedure:
• Press and hold the "Off" button on the Sunny Island until an
acoustic signal sounds.
☑ The inverter LED is off on all Sunny Island inverters.
4 Starting and Stopping the System
SMA Solar Technology AG
Operating Manual
21
SI30M-44M-60H-80H-BE-en-33
Summary of Contents for SUNNY ISLAND 3.0M
Page 163: ......
Page 164: ...www SMA Solar com...
