Sunny Island 4500
Installation & Operating Instructions
BWRI45-13-EE0304
- 140 -
SMA Regelsysteme GmbH
10 Diagnosis (DIAG)
Fig. 10.1:
Menu selection “DIAG“ (0-4)
The Sunny Island has a very powerful system management. It makes it possible to
adjust the controlling behavior of the Sunny Island precisely to the connected island
grid and its components. To be able to optimize the required settings it is helpful to
have a look at the history of the plant’s behavior. However, the operator should not
be dependent on a PC that has to be operating all the time to be able to view these
data. Therefore, the Sunny Island not only continuously acquires changes of its oper-
ating state (“events“), but also any excess of a limiting value or error (“alerts“).
“Alerts“ are to be divided into more serious ones that the user has to confirm, and
less serious ones which are merely recorded in the error list (see Chapter 18). The
“DIAG“ (0-4) menu selection shows the error status of the system. The menu branch
itself comprises detailed lists of the latest errors and system states. For a clear dis-
tinction, “events“ are marked with an “E“ in front, “alerts“ with an “A“.
