SMA America, LLC
4 Assembly
Technical description
SI4548_6048-US-TB_en-13
29
Observe the following conditions during mounting:
• The mounting location and method must be suitable for the weight and dimensions of the
Sunny Island.
• Mount on a solid surface.
• The mounting location must be accessible at all times.
• The ambient temperature must be between − 13°F ( − 25°C) and 140°F (+60°C).
• Do not expose the Sunny Island to direct solar irradiation, so as to avoid power reduction due
to excessive heating.
• Mount the Sunny Island in such a way that the display is at eye level in order to allow the
operating state to be read at all times.
• Mount vertically or tilted backwards by max. 45°.
• Never mount the device with a forward tilt.
• Do not mount in a horizontal position.
• The connection area may not point upwards.
• The room air can have a humidity of up to 100%, but this must not be condensing.
• In a living area, do not mount the unit on
plasterboard walls, etc. in order to avoid audible
vibrations.
The Sunny Island can make noises when in use
which can be considered a nuisance when installed
in a living area.
Summary of Contents for Sunny Island 4548-US
Page 2: ......
Page 14: ......
Page 240: ...www SMA Solar com SMA Solar Technology SMA America LLC www SMA America com...
