Operation
SMA America, LLC
90
SI5048U-TUS121440
Technical Description
10.7 Parameter Display
Parameters on the Sunny Island are displayed as follows:
In the upper line, the parameter number comes first, then
a separator (hash) followed by the parameter name. In
the lower line, there is the value with the unit and the
modification mark (enter arrow) is on the far right.
10.8 Display of Events
The Sunny Island can display a list of events:
The running count of the events is on the upper line; the
date and time display changes in 2-second intervals On
the lower line are the number of the event and the
corresponding short text.
Stopping the Generator Manually
If the generator has been manually stopped, no generator status information is displayed.
The field remains empty in this case.
Indications of a Warning
If faults occur, the device switches into standby mode and shows the fault on the display.
The fault must be eliminated and confirmed, then the Sunny Island carries out an autostart.
Parameter/Value List
If you would like to switch from a menu (regardless of whether it is a main or sub-menu)
into a parameter/value list, the menu numbers are not included on the display.
Syntax for Menus and Parameters
The syntax specified here for menus and parameters applies to the entire document.
A menu is identified by the number of the menu, the hash and the name of the menu
(e.g., 120# Battery Meters).
A parameter is identified by the menu number, period, parameter number and the name of
the parameter (120.02BatVtg).
