background image

SMA Solar Technology AG

Security

User Manual

SMC70HV11-BA-BEN112930

7

2 Security

2.1 Intended Use

The Sunny Mini Central is a PV inverter, which converts the direct current of the PV array to 
grid-compliant alternating current and feeds it into the power distribution grid.

Operating principle of a PV plant with Sunny Mini Central

The Sunny Mini Central is suitable for indoor and outdoor use.
The Sunny Mini Central may only be operated with PV arrays (PV modules and cabling) of protection 
class II. Do not connect any energy sources other than PV modules to the Sunny Mini Central.
Do not use the Sunny Mini Central for purposes other than those described here. Alternative uses, 
modifications to the Sunny Mini Central or the installation of components not expressly recommended 
or sold by SMA Solar Technology AG void the warranty claims and operation permission. Contact 
the SMA Serviceline if you need clarification regarding the intended use of the inverter.
This manual is a part of the Sunny Mini Central. Observe all of the activities described in this 
document. Keep this manual in a convenient place for future reference.

Summary of Contents for SUNNY MINI CENTRAL 7000HV

























Reviews: