9 Operation
SMA Solar Technology AG
Operating Manual
STPx0-3SE-40-BE-en-10
73
Position
Designation
Description
D
Status bar
Displays the following information:
• Inverter serial number
• Inverter firmware version
• IP address of the inverter within the local network
and/or IP address of the inverter during WLAN
connection
• With WLAN connection: Signal strength of WLAN
connection
• User group logged in
• Date and device time of the inverter
E
Current power and cur-
rent consumption
Temporal progression of the PV power and the power
consumption of the household over the selected time pe-
riod. Please note, the power consumption will only be dis-
played if an energy meter is installed in the PV system.
F
Status display
The various areas display information on the current status
of the system.
•
Device status
Displays whether the inverter is currently in a fault-
free operating state or whether there is an Error or
Warning present.
•
System overview
Shows the current power flows between the
components of the system.
•
Yield
Displays the energy yield of the inverter.
•
Nominal energy throughput of the battery
Indicates how much energy has been charged to the
battery and how much has been discharged from the
battery.
•
Energy exchange at the grid-connection point
Indicates which power is currently fed in or obtained
at the grid-connection point.
9.4
Displaying and Downloading the Stored Data
When a smart device is connected to the product via LAN or Wi-Fi, you can view and download
the stored data.
Procedure:
1. Open the user interface (see Section 9.1, page 66).
2. Log into the user interface (see Section 9.2, page 69).
Summary of Contents for SUNNY TRIPOWER 10.0 SMART ENERGY
Page 132: ...www SMA Solar com...
