Medi-Minder Installation Manual Rev1.11
12
6.2.8
PREFERENCES Programming Options
Unit Help Button - (Ademco & British DTMF Versions)
Call = Initiates Emergency
Help = Initiates Call
1.
“
_P
” is displayed. Press the HELP Button.
2.
“
un
” is displayed. Pressing the HELP Button again toggles between “
CL
” Call and “
HP
” Help.
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press CANCEL Button.
Unit Help Button Channel - (Ademco Version only)
1 to 8 = Unit Channel/Zone Reporting 1 to 8
1.
“
uC
” is displayed. Press the HELP Button to view programmed option.
2.
“
6
” is displayed. Pressing the HELP Button again to scroll through digits from “
1
” to “
8
”.
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press CANCEL Button.
Unit Help Button - (Contact ID Version only)
Panic – Panic 120 (Cancel/Green Button won’t Cancel/Restore Alarm)
Answer – Entry Delay Panic 120 (Cancel/Green Button Restore & also answers Incoming Call)
Security – Panic 120 (Cancel/Green Button Cancel/Restore Alarm)
Medical – Entry Delay Panic 100 (Cancel/Green Button Cancel/Restore Alarm)
Duress – Silent Panic 121 (Cancel/Green Button Cancel/Restore Alarm)
Delay Panic – Entry Delay Panic 100 (Cancel/Green Button won’t Cancel/Restore Alarm)
1.
“
un
” is displayed. Press the HELP Button to view programmed option.
2.
“
Pc
” is displayed. Pressing the HELP Button again to scroll through (
Pc, An, Sc, HP, du
and
dP
).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep
twice while flashing the display to acknowledge that the option has been selected. Press CANCEL
Button to move to the next Program Option.
Exit Time
10 to 60 Seconds - The time requesting Arm Mode and Medi-Minder unit being in that Mode.
1.
“
E1
” is displayed. Press the HELP Button to view programmed time. “
60
” is displayed.
2.
Pressing the HELP Button again to step through times (
10, 20, 30, 40, 50
and
60
in 10 second steps).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press CANCEL Button to
move to the next Program Option.
Entry Time - (Contact ID Version only)
0 to 60 Seconds - Time between a Detector triggering and Medi-Minder unit alarming.
1.
“
En
” is displayed. Press the HELP Button to view programmed time. “
10
” is displayed.
2.
Pressing the HELP Button again to step through times
(0, 10, 20, 30, 40, 50
and
60
in 10 second steps).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press CANCEL Button.
Pre-Alarm Time - (Ademco & British DTMF Versions)
0 to 60 Seconds - Time between a Key or Detector triggering and Medi-Minder unit alarming.
1.
“
PA
” is displayed. Press the HELP to view programmed time. “
10
” is displayed.
2.
Pressing the HELP Button again to step through times (
0, 10, 20, 30, 40, 50
and
60
in 10 second steps).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press CANCEL Button.
