Medi-Minder Installation Manual Rev1.11
13
Lockout
Enabled - MediMinder Unit will Lockout any Detector (excluding those programmed with FIRE
option) alarms that have alarmed more than 2 times in Arm Mode.
Disabled
1.
“
Lc
” is displayed. Press the HELP Button to view programmed option.
2.
“
E
” is displayed. Pressing the HELP Button again toggles between “
E
”Enabled and “
d
” Disabled.
3.
To store an option selected, press the CANCEL and HELP Buttons at the same time. The unit will beep
twice while flashing the display to acknowledge that the option has been selected.
4.
Press the CANCEL Button to move to the next Program Option.
Supervision of Detectors
0 to 24 Hours - Interval where at least one Supervision signal is expected from each Detector.
1.
“
Su
” is displayed. Press the HELP Button to view programmed time.
2.
“
0
” is displayed. Pressing the HELP Button again to step through the digits (
0, 1
to
24
).
3.
To store an option selected, press the CANCEL and HELP Buttons at the same time. The unit will beep
twice while flashing the display to acknowledge that the option has been selected.
4.
Press the CANCEL Button to move to the next Program Option.
Inactivity Timer
0 to 200 = 0 to 200 Hours or 201 to 255 = 1 to 55 Minutes
Note: Interval where at least one activity signal is expected from each individual Dementia Key or any
Inactivity Detector. If a number greater than 255 is programmed, the unit will sound a long beep.
1.
“
In
” is displayed. Press the HELP Button to view programmed time. The programmed time will flash on
status display. If you wish to view the programmed time again, press CANCEL and then HELP Button.
“ -” is displayed and flashes on the unit.
2.
Pressing the HELP Button again to step through the digits (
1, 2, 3, 4, 5, 6, 7, 8, 9
and
0
). Press the
CANCEL and HELP Buttons at the same time to store each digit. The unit will beep twice and display the
next digit to be programmed. Repeat this process until all digits are programmed.
3.
Press the CANCEL Button to display the programmed time. The unit will flash on status display for each
digit and beep twice at the end of the programmed time stored.
4.
Press the CANCEL Button to move to the next Program Option.
Inactivity Restore
Disabled - Restores only by the Medi-Minder unit CANCEL (Green) Button.
Enabled - Restores if it receives an activity message from the particular Device or by the Medi-
Minder unit CANCEL (Green) Button.
1.
“
Ir
” is displayed. Press the HELP Button to view programmed option.
2.
“
d
” is displayed. Pressing the HELP Button again toggles between “
d
” Disabled and “
E
” Enabled.
3.
To store an option selected, press the CANCEL and HELP Buttons at the same time. The unit will beep
twice while flashing the display to acknowledge that the option has been selected.
4.
Press the CANCEL Button to move to the next Program Option.
Quiet - (Ademco & British DTMF Versions)
Disabled - Medi-Minder unit beeps on all Key presses and Alarms.
Enabled - Medi-Minder unit beeps are suppressed. Medi-Minder unit will answer in LISTEN
ONLY MODE. This does not effect the Hands Free Operation.
1.
“
SH
” is displayed. Press the HELP Button to view programmed option.
2.
“
d
” is displayed. Pressing the HELP Button again toggles between “
d
” Disabled and “
E
” Enabled.
3.
To store an option selected, press the CANCEL and HELP Buttons at the same time. The unit will beep
twice while flashing the display to acknowledge that the option has been selected.
4.
Press the CANCEL Button to move to the next Program Option.
