Medi-Minder Installation Manual Rev1.11
20
6.2.13
REPORTS Programming Options
Report Modes - (Medi-Minder 3G Version Only)
GSM Only
GPRS/PSTN
PSTN/GPRS
GPRS Only
GPRS/GSM/PSTN
PSTN/GPRS/GSM
GPRS/GSM
PSTN Only
PSTN/GSM/GPRS
1.
“
rS
” is displayed. Press the HELP Button to view programmed option. “
8
” is displayed.
2.
Pressing the HELP Button again to scroll through (
0, 1, 2, 3, 4, 5, 6, 7,
&
8
).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press the CANCEL Button.
Manual Test Reports - (Ademco Version Only)
Disabled
Enabled - Sends a non valid ADEMCO MANUAL TEST (NNNN / 55555555 / 7)
1.
“
_r
” is displayed. Press the HELP Button. “
CS
” is displayed.
2.
Pressing the HELP Button again toggles between
“ 0” Disabled
,
“ 1” ADSL
and
“ 2” Enabled
.
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press CANCEL Button.
Restores Enabled - (Ademco and Contact ID Versions)
Enabled - Restores are sent to the Monitoring Centre.
Disabled - No Restores.
1.
“
rE
” is displayed. Press the HELP Button to view programmed option. “
E
” is displayed.
2.
Pressing the HELP Button again toggles between “
E
” Enabled and “
d
” Disabled.
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press the CANCEL Button.
Open/Close Reports - (Contact ID Version Only)
Disabled
Enabled - Open/Close reports are sent to the Monitoring Centre.
1.
“
OC
” is displayed. Press the HELP Button to view programmed option. “
d
” is displayed.
2.
Pressing the HELP Button again toggles between “
d
” Disabled and “
E
” Enabled.
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press the CANCEL Button.
Mains Fail Delay
1 to 24 Hours delay before reporting a Mains Fail randomly within the hour.
0 = Report Mains Fail once only at random (between 60 minutes to 180 minutes).
1.
“
Pd
” is displayed. Press the HELP Button to view programmed option. “
3
” is displayed.
2.
Pressing the HELP Button again to step through Time Before Next Mains Fail Report (
0, 1 to 24
).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press the CANCEL Button.
Mains Fail Repeat
No more Mains Fail Report (Reports Once Only).
1 to 24 Hours: Send another Mains Fail Report in the specific amount of hours.
1.
“
Pr
” is displayed. Press the HELP Button to view programmed time. “
0
” is displayed.
2.
Pressing the HELP Button again to step through the digits (
0, 1 to 24
).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press the CANCEL Button.
Low Battery Main Unit Reporting
Report Low Battery ONCE
Report Low Battery DAILY
No Low Battery Reporting
1.
“
bu
” is displayed. Press the HELP Button to view programmed option. “
1
” is displayed.
2.
Pressing the HELP Button again to step through Low Battery Reporting (
0, 1, or 2
).
3.
To store an option selected, press CANCEL and HELP Buttons at the same time. The unit will beep twice
while flashing the display to acknowledge that the option has been selected. Press the CANCEL Button.
