Medi-Minder Installation Manual Rev1.11
5
5 . P r o g r a m m i n g
5.1 Programming Rules
The easiest way to program the Medi-Minder unit is to
use the large CANCEL (Green) Button and the HELP (Red) Button on the Medi-Minder unit.
1
Press the
CANCEL (Green)
Button on the Medi-Minder unit to
scroll through
the Main
Menu Options or the Sub Menu Options.
2
Press the
HELP (Red)
Button on the Medi-Minder unit to
view the programmed value
for
that option. The values will be displayed flashing. To step through values, press the HELP
(Red) Button again.
3
To
store an option
selected, press the
CANCEL (Green) and HELP (Red)
Buttons at the
same time. The Medi-Minder unit will beep twice while flashing the display to acknowledge
that the option has been selected.
5.2 Programming Options
NOTE: If NO Buttons on the Medi-Minder unit or the Radio Key Pendants have been pressed within 5 minutes, the Medi-
Minder unit will revert back to NORMAL OPERATION MODE (NB: A Client Account Number and at least one Phone
Number must be programmed in for the Medi-Minder unit to Exit Program Mode and enter Normal Operation Mode).
To enter Programming Options:
1.
The Medi-Minder unit must be turned Off by unplugging the Mains and the Battery Switch must also be Off.
2.
Turn the Battery Switch to On and plug in the Mains.
3.
The Medi-Minder unit will display the version number eg. “
1.1
”for 2 seconds and beep once.
4.
“
_A
” is displayed to indicate that it is in Programming Options.
5.
Now go to
Section 6. Programming Options
.
5.3 Product Programming (Default = Medi-Minder Ademco)
Skip this Section if you’re NOT changing the Product Type.
The Product Type is programmed by entering the Special Code on the Medi-Minder unit. This will reset all Programming
Options and will have to be completely reprogrammed again in the new mode. If the code is unknown then the Medi-
Minder unit will default to the previous Product Type and it’s Option Programming will be maintained. The Medi-Minder
unit will remain in this Mode for only 5 minutes if the code hasn’t been entered.
To enter Product Programming:
1.
The Medi-Minder unit must be turned Off by unplugging the Mains and the Battery Switch must also be Off.
2.
Hold down the
CANCEL (Green) and HELP (Red) Buttons
and Power up the Medi-Minder unit.
3.
The Medi-Minder unit will beep once while “PP” will be displayed to indicate that it is in Product Programming.
4. Using the CANCEL (Green) and HELP (Red) Buttons, a Code may be entered as follows:
a. Medi-Minder ADEMCO
-
Press
CANCEL, CANCEL, CANCEL, HELP
b. Medi-Minder CONTACT ID
-
Press
CANCEL, HELP, CANCEL, HELP
c. Medi-Minder BRITISH DTMF
-
Press
HELP, HELP, CANCEL, HELP
5.
Press the
CANCEL (Green) and HELP (Red) Buttons at the same time
to acknowledge end of Product
Programming. The Medi-Minder unit will beep once while “
_A
” is displayed to indicate that it is in Programming
Options.
Now go to Section 6. Programming Options.
