Medi-Minder Installation Manual Rev1.11
7
6.2 Programming Sub Menu Options
The Sub Menu Options are displayed for each particular Main Menu Option.
6.2.1
CLIENT ACCOUNT NUMBER Programming Option
Client Account Number (Default - unprogrammed)
Note - ADEMCO & CONTACT ID Versions - 4 Digits Only.
Note - BRITISH DTMF Version only - up to 12 Digits maximum.
1.
“
_A
” is displayed. Press the HELP Button.
2.
“
CA
” is displayed. Press the HELP Button again to view programmed Client Account Number. The
programmed Client Account Number will flash on status display. If you wish to view the Client Account
Number again, press the CANCEL and then HELP Button. “ -” is displayed and flashes on the unit.
3.
Pressing the HELP Button again to step through the digits (
1, 2, 3, 4, 5, 6, 7, 8, 9
and
0
). To
STORE
each
digit, press the CANCEL and HELP Buttons at the same time to store each digit. The unit will beep twice
and display the next digit to be programmed. Repeat this process until all digits are programmed.
4.
Press the CANCEL Button to display the programmed Phone Number stored. The unit will flash on status
display for each digit and beep twice at the end of the Client Account Number stored.
5.
Press the CANCEL Button to move to the next Program Option.
6.2.2
PHONE NUMBERS Programming Options - 30 Digits Maximum
Primary Phone Number - Monitoring Centre Phone Number 1
Star
Hash
Pause
1.
“
_n
” is displayed. Press the HELP Button.
2.
“
n1
” is displayed. Press the HELP Button again to view programmed Phone Number. The programmed
Phone Number will be flashed on status display. If you wish to view the Phone Number again, press the
CANCEL and then HELP Button. “ -” is displayed and flashes on the unit.
3.
Pressing the HELP Button again to step through the digits (
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, t, H
and
-
). To
STORE
each digit, press the CANCEL and HELP Buttons at the same time to store each digit. The unit
will beep twice and display the next digit to be programmed. Repeat this process until all digits are
programmed.
4.
Press the CANCEL Button to display the programmed Phone Number stored. The unit will be flashed on
status display for each digit and beeps twice at the end of the Phone Number stored.
5.
Press the CANCEL Button to move to the next Program Option.
Secondary Phone Number – Monitoring Centre Phone Number 2
Mobile Phone Number 1 – Voice Only Reporting Number 1
Mobile Phone Number 2 – Voice Only Reporting Number 2
Default Values –
Deletes/Erases all the Phone Programming to Default Values
Warning! This will Deletes/Erases all Programmed Phone Numbers n1 to n4
6.
“
dF
” is displayed. Press the CANCEL and HELP Buttons at the same time and the unit will beeps three
times to indicate that ALL Phone Numbers (n1 to n4) have been Erased.
7.
Press the CANCEL Button to move to the next Program Option.
