background image

14 

LIMITED WARRANTY STATEMENT 

A. 

Extent of limited warranty 

Smart-AVI Technologies, Inc. warrants to the end-user customers that the Smart-AVI product specified above 

will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on 

the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. 

Smart-AVI limited warranty covers only those defects which arise as a result of normal use of the product, 

and do not apply to any: 

a. Improper or inadequate maintenance or modifications

b. Operations outside product specifications

c. Mechanical abuse and exposure to severe conditions

If Smart-AVI receives, during applicable warranty period, a notice of defect, Smart-AVI will at its discretion 

replace or repair defective product. If Smart-AVI is unable to replace or repair defective product covered by 

the Smart-AVI warranty within reasonable period of time, Smart-AVI shall refund the cost of the product. 

Smart-AVI shall have no obligation to repair, replace or refund unit until customer returns defective product 

to Smart-AVI. 

Any replacement product could be new or like new, provided that it has functionality at least equal to that of 

the product being replaced. 

Smart-AVI limited warranty is valid in any country where the covered product is distributed by Smart-AVI. 

B.  

Limitations of warranty  

To the extant allowed by local law, neither Smart-AVI nor its third party suppliers make any other warranty or 

condition of any kind whether expressed or implied with respect to the Smart-AVI product, and specifically 

disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular 

purpose. 

C. 

Limitations of liability  

To the extent allowed by local law the remedies provided in this warranty statement are the   cus-

tomers sole and exclusive remedies. 

To the extant allowed by local law, except for the obligations specifically set forth in this warranty statement, 

in no event will Smart-AVI or its third party suppliers be liable for direct, indirect, special, incidental, or con-

sequential damages whether based on contract, tort or any other legal theory and whether advised of the 

possibility of such damages. 

D. 

Local law 

 

To the extent that this warranty statement is inconsistent with local law, this warranty 

statement shall be considered modified to be consistent with such law

Summary of Contents for EZWall-Pro















Reviews: