4X4 HDMI Matrix & WALL System
7
CONTROL USING THE FRONT PANEL
The front panel supports changing between several modes, Matrix, Wall, and the preset
saved onto Macro 1 and Macro 2.
To use Matrix Mode, select this mode and then select the desired Output and Input
respectively. For example to set Input 1 on Output 3, the user must press Button 5 -> Button
3 (Output) -> Button 1 (Input).
To use Wall Mode, select this mode and the select the desired Input.
To use the Macro buttons, user must access the web page of QWALL-HD and set each
button to a specific preset. Once the user saves the Macro button from the web, QWALL-HD
will always change to the specific preset with the selected input until the user updates
QWALL-HD to perform a new macro.
BUTTON
DESCRIPTION
1
Input 1
2
Input 2
3
Input 3
4
Input 4
5
Matrix Mode
6
Wall Mode
7
Macro 1
8
Macro 2
There are a total of 8 buttons used for the front panel of QWALL-HD.
