l
Audio system to projector
l
Power supply to power outlet
l
Projector to power outlet
l
SMART GoWire auto-launch cable to ACP
l
SMART GoWire auto-launch cable to laptop (if you’re using a laptop)
Locking the pen tray to your interactive whiteboard
To learn how to lock the pen tray to your interactive whiteboard, see the
SMART Board X800 Series
Interactive Whiteboard User’s Guide
).
Installing your audio system
If you purchase the SBA-L projection audio system, it comes with two SBA-L speakers and mounting
brackets. The audio system also includes a switching power supply and the cabling required to
connect the audio system to your SMART Board interactive whiteboard system with appliance.
Before you connect the audio system to the projector, you must install the speaker brackets,
speakers and speaker cable clips. Mount the speakers directly to your interactive whiteboard.
Connect the speakers to the projector connection panel using the dual-channel (left and right) RCA
plug-to-3.5 mm phone connector cable included with the speakers.
To learn how to install your audio system, see the
SBA-L Projection Audio System installation guide
(
).
Routing the cables
When routing cables for your interactive whiteboard system with appliance, follow the cable
connection label located on the back of your interactive whiteboard.
C H A P T E R 2
Installing your interactive whiteboard system
10
