Focusing the image
Use the focus dial located on the bottom of the SMART UX60 projector to focus the projected image.
g
To focus and adjust the image
Turn the focus dial clockwise or counterclockwise until the image is in focus.
Adjusting the image
l
Project a computer image set to the proper resolution while adjusting the image. If you don’t
have a computer, use the projector’s default background so that you can see the full projected
image clearly. If possible, use a pure white screen to allow for easier alignment.
l
Use the mechanical adjustments described in the installation document to make image
adjustments instead of the projector’s on-screen menu options.
l
When adjusting keystone (tilt), ensure that the top and bottom edges of the image are
horizontal before you position the left and right edges of the image relative to your interactive
whiteboard.
l
To fine-tune the image, you might need to repeat all steps described in the installation
document in smaller increments.
C H A P T E R 4
Using your interactive whiteboard system
26
