Retrieving your password
If you forget the projector’s password, you can retrieve it by accessing the projector service menu
directly from the projector or from the password settings menu on your projector’s web page (see
g
To retrieve your password from the service menu
1. Using the remote control, press the following buttons quickly to access the service menu:
Down
,
Up
,
Up
,
Left
,
Up
.
2. Scroll to
Password Get
, and then press
Enter
on the remote control.
The password appears on the screen.
3. Write down the password.
4. Scroll to
Exit
, and then press
Enter
on the remote control to exit the projector service menu.
Resetting the projector
At some point during troubleshooting, you might need to reset all projector settings.
I
I M P O R T A N T
This action is irreversible.
g
To reset all projector settings
1. Using the remote control, press the following buttons quickly to access the service menu:
Down
,
Up
,
Up
,
Left
,
Up
.
2. Scroll to
Factory Reset
, and then press
Enter
on the remote control.
3. Scroll to
Exit
, and then press
Enter
on the remote control to exit the projector service menu.
C H A P T E R 7
Troubleshooting your interactive whiteboard system
61