A P P E N D I X A
Using the on-screen display menu
71
smarttech.com/kb/170446
Option
Values
Function
Notes (if any)
BRIGHTNESS
0–100
Sets the brightness of the welcome
screen
You can modify this option only if
you select
ENABLE
in
PROXIMITY
.
CEC
ENABLE
DISABLE
Enables or disables Consumer
Electronics Control (CEC) support
on HDMI inputs
HEAT STATUS
FAN1
[N/A]
Displays the status of the first fan
This option only displays
information. You’re unable to
modify it.
FAN2
[N/A]
Displays the status of the second
fan
This option only displays
information. You’re unable to
modify it.
SENSOR1
[N/A]
Displays the temperature reading
from the first sensor
This option only displays
information. You’re unable to
modify it.
SENSOR2
[N/A]
Displays the temperature reading
from the second sensor
This option only displays
information. You’re unable to
modify it.
FAN CONTROL
COOLING FAN
ON
AUTO
Sets the fan to run continuously
(ON) or only when the sensor
temperature is greater than
optimal sensor temperature
(AUTO)
FAN SPEED
LOW
HIGH
Sets the speed of the fan
SENSOR1
35–55
Sets the optimal temperatures for
the first sensor (in degrees
Celsius)
SENSOR2
35–55
Sets the optimal temperatures for
the second sensor (in degrees
Celsius)
USB SETTING
USB1
VGA1
VGA2
DVI
HDMI1
HDMI2
HDMI3/PC
DISABLE
Sets the video input for the USB1
receptacle, or disables the
receptacle
The video input you select must be
unique for USB1.
