Preparing to Install Your Interactive Whiteboard
3
Preparing to Install Your Interactive Whiteboard
Before you install the screen in the wall opening, you’ll need to complete the following tasks:
•
unpack and check the components (this page)
•
install SMART Board software (page 4)
•
create a wall opening for the unit (page 5)
•
attach mounting brackets to the interactive whiteboard (page 6)
Unpacking and Checking Components
Unpack the shipping containers and check each item removed against the list below. If any items
are missing, contact Technical Support (page 59). Each shipment includes the following
components:
•
a SMART Board interactive whiteboard with a protective cover on its back surface
NOTE:
Leave this cover on until you’ve installed the interactive whiteboard into the wall
opening (page 10).
•
a box containing a pair of mounting brackets, the
Pen Tray Wall Mount Template
, the
accessory kit (contents listed below), the wireless keyboard kit (contents listed below), and the
pen tray with the wall brackets, keyboard brackets and IR receiver attached
Inside the accessory kit, you’ll find:
•
a hardware kit containing four hex screws, four split lockwashers and a 3/16" hex key for
attaching both mounting brackets to the interactive whiteboard, as well as 20 Phillips® No. 10
wood screws for attaching the mounting brackets to the wall opening
•
five E-Z insert drywall anchors and five Phillips No. 8 × 1 1/4" screws for mounting the pen tray
assembly
•
a set of four pens and a dry-erase eraser
•
two cable grommets and a SMART USB adapter
•
if you ordered it, one 20' (6.1 m) DB9 F/F serial cable or the Macintosh serial adapter
•
a SMART Board software CD, a registration card, a warranty information page, this guide and
a
SMART Board Software User
’
s Guide
•
two 6' (1.8 m) extension cables for extending the IR receiver cable (if required)
•
a 39" (99.1 cm) modular communications cable
•
a power supply and a country-specific power cable
The wireless keyboard kit includes the keyboard, a PS/2 cable and a user’s manual (North
America, Australia and Europe only; Windows operating systems only).
Summary of Contents for In-WallRear Projection Interactive Whiteboard
