A P P E N D I X A
Remotely managing your system through a network interface
49
Submenu setting
Description
Contact
Displays or allows you to set the contact name or number for
projector support (maximum 16 characters).
SNMP Enable
Turns the Simple Network Management Protocol (SNMP) agent
on or off.
Read-Only Community
Sets a password that is required for each SNMP get request to
the device.
N O T E
The default for Read-Only Community is public.
Read/Write Community
Sets a password that is required for each SNMP set request to the
device.
N O T E
The default for Read/Write Community is private.
TRAP Destination Address Displays or allows you to set the IP address of the network’s
SNMP TRAP manager in values between 0.0.0.0 and
255.255.255.255. The TRAP destination address is the IP address
of the computer assigned to handle unsolicited data generated by
SNMP TRAP events generated by the projector, such as power
state changes, projector failure modes, a lamp needing to be
replaced or other issues.
Email alerts
This menu enables you to enter your preferred address for receiving email alerts and adjust
related settings.
Submenu setting
Description
Email Alert
Selects
Enable
to turn on or
Disable
to turn off the Email Alert
function.
To
Displays or allows you to set the email address of the email alert
recipient.
CC
Displays or allows you to set the email address of the email alert
“copy to” recipient.
From
Displays or allows you to set the email address of the user who
sends the email alert.
Outgoing SMTP server
Displays or allows you to set the Simple Mail Transfer Protocol
(SMTP) server that you use on your network.
Username
Displays or allows you to set the SMTP server user name.
Password
Displays or allows you to set the SMTP server password.
