A P P E N D I X C
Integrating other devices
79
2. Connect a VGA cable from the laptop to the projector.
OR
Connect an HDMI cable from the laptop to the projector.
3. Press the
Input
button on the remote control or the
Input Select
button on the pen tray to
switch input sources to the laptop.
The SMART UX80 projector allows synchronisation between two adjacent systems. The two
projectors can be connected with a Cat 5 crossover cable to allow the control of the power states
through a single interactive whiteboard, through the remote control or through a room control
system.
To connect a second projector
Connect a Cat 5 crossover cable to the Projector 2 port of the primary SMART UX80
projector and into the Projector 2 port of the secondary SMART UX80 projector.
N O T E
The Projector 2 ports synchronise power states only and don’t carry audio or video.
