SmartKart3 adds a third wheel to your hoverboard. A new fun and different
way of transportation that everyone can drive without having a constant fear
of falling. It is easy for any age to steer and operate. The SmartKart3 is
comfortable, versatile and has many practical uses. No more falling off when
the hoverboard hits a crack or bump in the pavement. Sitting is far safer than
standing.
STEP 1
Separately put Four M8*40mm inserted into the hole of the pedal frame (see
Figure 1), then install 6 inch inflatable tire, M8 flat washer, M8 shrapnel in
sequences, (see Figure 2), last secure with M8 lock nuts and tighten nuts using a
wrench (see Figure 3).
STEP 2
Direction control lever: Separately put the Direction control levers (Left & Right)
inserted into Base stand (see Figure 4), make sure the hole is in the right place
and secure with M6*40mm screws as well as M6 shrapnel, (see Figure 5). Then
secure with M8 lock nuts and tighten nuts using wrench (see Figure 6). (Should
look like Figure 7).
Figure 1
Figure 2
Figure 3
Figure 4
Figure 7
Figure 5
Figure 6
How to Assemble SmartKart3 Pro
