Setting
Use
Notes
Set to Default?
Resets projector settings to their
default values.
If you select
Yes
, all projector settings
reset to their defaults, reversing any
menu changes you made. This action
is irreversible.
Don’t adjust this setting unless you
want to reset all of the applied settings,
or unless you’re advised to by a
certified SMART Support specialist
(
).
Network menu
Network and VGA
Out
Activates the VGA out and network
features.
Status
Displays the current network status
(
Connected
,
Disconnected
or
Off
).
DHCP
Displays the status of the network’s
Dynamic Host Control Protocol
(DHCP) as
On
or
Off
.
On
automatically assigns the DHCP
server’s IP address to the projector.
Off
enables an administrator to assign
an IP address manually.
Password
Reminder
E-mails the network password to the e-
mail recipient.
See
56 to set up a destination e-mail
address.
IP Address
Displays the projector’s IP address in
values between 0.0.0.0 and
255.255.255.255.
Subnet Mask
Displays the projector’s subnet work
mask number in values between
0.0.0.0 and 255.255.255.255.
Gateway
Displays the projector’s default
network gateway in values between
0.0.0.0 and 255.255.255.255.
DNS
Displays the projector’s primary
domain name number in values
between 0.0.0.0 and 255.255.255.255.
MAC Address
Displays the projector’s MAC address
in xx-xx-xx-xx-xx-xx format.
Group Name
Displays the projector’s workgroup
name as set by an administrator
(maximum 12 characters).
Projector Name
Displays the projector’s name as set
by an administrator (maximum 12
characters).
Location
Displays the projector’s location as set
by an administrator (maximum 16
characters).
C H A P T E R 3
Using your interactive whiteboard system
17
Summary of Contents for X800ix
