2.4.2 Power Frequency
2.4.4 Panel Protect
14
Set the power frequency on the recorder, this can be either 50Hz or 60Hz.
The power save option will allow the unit to record for longer. If the power save setting is turned
on, the unit will be powered for longer without the need to re-charge as the screen will be turned
off but the unit will still record. You can set the screen to turn off after 1, 3 or 5 minutes of inactivity.
2.4.3 Power Save
The panel protect function will save power on the recorder by turning off the screen after 30
seconds, 1 minute or 2 minutes.
