2
3
INTRODUCTION
INTRODUCTION
This product uses the Oscillometric Measuring Method to detect blood pressure.
Before every measurement, the unit establishes a “zero point” equivalent to the
atmospheric pressure. Then it starts inflating the cuff. Meanwhile, the unit detects
pressure oscillation generated by beat-to-beat pulsatile, which is used to
determine the systolic pressure and diastolic pressure as well as pulse rate.
Measurement Principle
1. Consult a medical professional before using this device if you have an implanted
cardiac device, such as a pacemaker or defibrillator.
2. Consult a medical professional before using this device during pregnancy.
The signs below might be in the user manual, labeling or other components.
They are the requirement of standard and using.
Safety Information
General Description
The iBloodPressure
®
monitor features blood pressure measurement,
pulse rate measurement, and cellular result transmission to cloud
storage. Readings taken are equivalent to those obtained by a trained
observer using the cuff and stethoscope auscultation method. This
manual contains important safety and care information and provides
step by step instructions for using the product. Read the manual
thoroughly before using the product.
Patient is an intended operator.
Features:
78*92 mm Digital LCD display
Measuring during inflation technology
E-MTC wireless communication
Indications for Use
The iBloodPressure
®
Blood Pressure Monitor is a digital monitor intended for use in
measuring blood pressure and heartbeat rate with arm circumference ranging from
22cm to 45cm (about 8¾˝-17½˝).
The device can be used to detect irregular heartbeat.
It is intended for adult indoor use only.
Contraindications
Warranty
Smart Meter LLC warrants that this product will be free from defects in materials
and workmanship for two years from the date of purchase.
This warranty does not apply to the performance of an iBloodPressure
®
Meter that has been altered, misused, tampered with or abused in any way. This
warranty applies only to the original purchaser of the iBloodPressure
®
.
iBloodPressure
®
is a registered trademark of Smart Meter LLC.
Receiving and Inspection
Remove this monitor from the packaging and inspect for damage. If this monitor is
damaged, DO NOT USE and consult with your retail outlet or distributor.
Manufacturer
Serial Number
Polarity of d.c. power
connector
Consult instructions for use or
consult electronic instructions for use
Type BF applied part
Direct Current
Batch code
Date of manufacture
General symbol for
recovery/recyclable
Class II Equipment
For indoor use only
MR Unsafe
To identify an item which poses unacceptable risks to the patient, medical
staff or other persons within the MR environment.
Caution
Indicates that caution is necessary when operating the device or control close
to where the symbol is placed, or that the current situation needs operator
awareness or operator action in order to avoid undesirable consequences.
The symbol indicates that the product should not be discarded as unsorted
waste but must be sent to separate collection facilities for recovery and
recycling.
Refer to instruction manual/booklet
To signify that the instruction manual/
booklet must be read.(The background
color of the symbol is blue.)
