13
12
1
.When the monitor is off, press the
“ START/STOP ” button to turn on the
monitor. The cuff will automatically
inflate, complete the measurement,
and transmit the results.
MEASUREMENT
MEASUREMENT
Display resets to zero.
LCD display
Inflating and measuring.
Display the results.
2
.
The device will transmit the data
after measurement.
The symbol blinks on the
LCD indicates data is
transmitting.
Taking a Measurement
Transmitting results.
Tip:
You can press “ START/STOP ” button at any time to stop measuring during
the process.
3
.If the data is successfully
transmitted, the symbol
will disappear and the LCD
will display and then the
device will turn off automatically.
If the data transmission fails,
Error message will be shown
(take E6 for example) on the
display for several seconds
then the device will turn off
automatically.
Note: the result will be
transmitted next time a
cellular connection is made.
