9
8
Start Measuring
Daily Measurement
With original SENSE ON patent technology, the scale
will automatically switch on as you step on the platform
barefooted.
Stand still and keep full contact with the scale, the weight data on the LCD will
blink twice, then the weight is locked. The weight data will be transmitted after 10
seconds
.
When data is successfully transmitted, “oH” will be displayed and
icon
“ ” stops blinking.
If the data transfer fails, “E1” will be displayed and
icon
“ ” disappeared. Then the scale
will turn off in about 3
seconds
.
Error Prompt
Error
Description
Solution
Overload error. The
device will power off.
Stop using this scale for
measurement.
Low battery error. The
device will power off.
Replace all four batteries
at
the same time. Please purchase
the authorized batteries for
replacement.
1. Move the scale to a
location where there is a
strong
er
signal.
2. Check with your telecom
operator for SIM card status.
Failure to pair-up with
the
network
.
Or Data
transmission error.
Eeprom checks failed.
Contact
Smart Meter
Technical Support
.
Troubleshooting
Query signal timeout.
No SIM card information
was found.
1.
Reinstall the batteries.
2.
Move the scale to
a lo
cation
with
a strong
signal.
Check with your telecom
operator for SIM card status.
