-15-
Important Information for
the User
Once the Smart Roller Shutter Opener has been
installed, the user must be informed about how it works
and all the risks that can arise if it is used improperly.
The user must avoid placing him/herself in dangerous
situations such as standing within the doorway when it is
moving.
Do not
let children play near the door and keep the
remote controls out of their reach.
All servicing, repairs or checks must be carried out
by professionally qualified personnel and noted on a
maintenance register kept by the user.
Information for the user is found in the USERS/OWNERS
MANUAL included with this opener.
IMPORTANT:
Please make sure the USERS/OWNERS
MANUAL is passed on to the owner prior to leaving the
installation.
IMPORTANT:
In case of a malfunction the user must call
an authorised Smart Openers Pty Ltd service technician
and should not attempt to repair the fault themselves.
Maintenance
No particular maintenance is required for the logic circuit
board.
At least twice a year check that the door is properly
balanced, travelling smoothly and that all working parts
are in good working condition.
IMPORTANT:
A poorly operating door can effect the life of
the automatic opener due to incorrect loads and will void
the warranty.
Check the reversing sensitivity at least twice a year and
adjust if necessary.
Make sure that the safety devices are working effectively
(photo beams, etc).
Final Notes
This manual is only for use by technical personnel
qualified to carry out the installation.
No information given in this manual can be considered of
any interest to the end user.
No setting or adjustments contained in this manual
should be carried out by the end user.
It is important for the installer to show their clients correct
operational use of the Smart Roller Shutter Opener.
Inform the owner about the need for regular and accurate
maintenance, especially regarding a regular check of the
safety and reversing devices.
Technical Specifications
Power Input:
240 VAC ±10% 50Hz
Motor:
24V DC 500W
Working temperature: -10° ~ 60°C
Relative Humidity:
<90%
Open and close force: 300N
Receiver frequency:
433.22MHz
Code Capacity:
200 Transmitters
Sensitivity:
>1V for correct receiver signal
(average range 50m, with an
aerial)
Decoding:
Rolling code
Transmitter power:
27A 12V Battery
NOTE: Smart Openers Pty Ltd reserves the right to
modify its product and product specifications at any
time without prior notice.
© June 2009 Smart Openers Pty Ltd