Smart Openers Smart Slider, Installation Manual

-15-

Power Save Mode

Power save mode allows the opener to go into a sleep 

state when not in use. Not only does this save power but 

it also greatly increases the life of back up batteries.

Note:

  When using auxillary devices such as a photo 

electric beam or external third party receiver and 

transmitters power save must be disabled (off) 

otherwise they will not receive power once the gate 

has closed. (Factory Default = On).

1.

   Press MENU for 3 secs then SET to cycle though to 

Power Save

. 

2.

  Press MENU to choose 

Off

. 

3.

  Press SET to confirm or MODE to save and exit.

Manual Disengagement

The Smart Slider opener is equipped with a manual 

disengagement device to enable you to open and close 

the gate in case of electrical failure, system malfunction 

or fire.

1.

For Manual Operation

Use the key to unlock the manual release latch. Pull 

the latch out to a 90° angle. If the latch feels hard 

to move you may need to use your spare hand to 

move the gate slightly to free the gearbox. Do not 

use excessive force. If excessive force is used it may 

result in damage to the disengagement mechanism. 

Before disengaging the gate to manual operation 

make sure power is off. 

2.

To Re-engage the Gate

Your Smart Slider is equipped with an automatic  

re-engagement mechanism. By closing the latch and 

locking it into place the opener gearbox automatically 

re-engages. The opener will automatically recognise 

the gates position between the travel limits on the 

next operation.

Important Information for  

the User

Once the Smart Slider opener has been installed, the 

user must be informed about how it works and all the 

risks that can arise if it is used improperly. The user must 

avoid placing him/herself in dangerous situations such as 

standing within the gateway when it is moving. 

Do not

 let children play near the gate and keep the 

remote controls out of their reach.
All servicing, repairs or checks must be carried out 

by professionally qualified personnel and noted on a 

maintenance register kept by the user.
Information for the user is found in the USERS/OWNERS 

MANUAL included with this opener.

IMPORTANT: 

Please make sure the USERS/OWNERS 

MANUAL is passed on to the owner prior to leaving the 

installation.

IMPORTANT: 

In case of a malfunction the user must call 

an authorised Smart Openers Pty Ltd service technician 

and should not attempt to repair the fault themselves. 

smart

s l i d e r

smart

s l i d e r

smart

s l i d e r

smart

s l i d e r

smart

s l i d e r

smart

s l i d e r

smart

s l i d e r

smart

s l i d e r

Fig. 35

Fig. 36

Power Save
On

Fig. 34