Smart Openers Smart Slider, Installation Manual

Maintenance

No particular maintenance is required for the logic circuit 

board.
At  least  twice  a  year  check  that  the  gate  is  properly 

balanced,  travelling  smoothly  and  that  all  working  parts 

are in good working condition.

IMPORTANT: 

A poorly operating gate can effect the life of 

the automatic opener due to incorrect loads and will void 

the warranty.

Check the reversing sensitivity at least twice a year and 

adjust if necessary.

Make sure that the safety devices are working effectively 

(photo beams, etc.)

Final Notes

This manual is only for use by technical personnel 

qualified to carry out the installation.
No information given in this manual can be considered of 

any interest to the end user.
No setting or adjustments contained in this manual 

should be carried out by the end user.
It is important for the installer to show their clients correct 

operational use of the Smart Slider including the use of 

the manual disengagement lever.
Inform the owner about the need for regular and accurate 

maintenance, especially regarding a regular check of the 

safety and reversing devices.

Technical Specifications

Power Input:    

240 VAC ±10% 50Hz

Motor:    

24V DC 

Working temperature:   -10° ~ 60°C
Relative Humidity:  

<90%

Open and close force:   300N
Receiver frequency:  

433.22MHz

Code Capacity:  

200 Transmitters

Sensitivity:  

>1V for correct receiver signal  

(average range 50m, with an  

aerial)

Decoding:  

Rolling code 

Transmitter power:  

27A 12V Battery

NOTE: Smart Openers Pty Ltd reserves the right to 

modify its product and product specifications at any 

time without prior notice.

-16-